Overview
Reset
Chart Settings
Option
Description
Width
Define the width of the chart in pixels. This option is used instead of resizing the chart using the dragging method.
Height
Define the height of the chart in pixels. This option is used instead of resizing the chart using the dragging method.
Chart Position
Specify the position of the chart in relation to the table.
Horizontal Alignment
Specify which edge of the table the chart should be aligned to.
Option |
Description |
---|---|
Width |
Define the width of the chart in pixels. This option is used instead of resizing the chart using the dragging method. |
Height |
Define the height of the chart in pixels. This option is used instead of resizing the chart using the dragging method. |
Chart Position |
Specify the position of the chart in relation to the table. |
Horizontal Alignment |
Specify which edge of the table the chart should be aligned to. |
Option
Description
Yearly Comparison
Display multiple years on the x axis of the chart, with one line per series.
Units
Select the granularity of the dates to be displayed. Selecting a unit of finer granularity than your data will result in using the level of your data.
Option |
Description |
---|---|
Yearly Comparison |
Display multiple years on the x axis of the chart, with one line per series. |
Units |
Select the granularity of the dates to be displayed. Selecting a unit of finer granularity than your data will result in using the level of your data. |
Option
Description
Shading
Define whether the area has shading or is a solid colour.
Curved
Define whether the corners to the bars/columns will be curved or squared.
Glow
Define whether the bars/columns will have a glow applied.
Shadows
Define whether the bars/columns have a shadow applied.
Colour Set
The colour applied to this chart will be based the selection made. Possible options are; Metric, Monochrome, Configuration Defaults.
- Metric: The colour applied to this chart will be based the default colours applied to metrics in the view. If no colour was defined for a metric, configuration defaults will be used.
- Monochrome: The colour applied to this chart will be based on different shades of a single selected colour.
- Configuration Defaults: The colour applied to this chart will be based on the defaults defined in configuration.
- Reference Code: The colour applied to this chart will be based on the defaults applied to the Org Reference Code.
Colour
This is only available if Monochrome is selected above. Define the colour to be used for monochromatic colouring of the chart.
Opacity
Select the opacity percentage of the chart. The lower the percentage, the more transparent it is.
Other Segment
Select the % of total a segment must be smaller than in order to be grouped into an 'Other' segment. If 0 there is no grouping.
Shadow Colour
Define the colour of the shadow effect applied to the pie.
Outline Colour
Define the colour of the outline of the pie and segments.
Outline Width
Define the width of the outline of the pie and segments.
Pie Shading Style
Define the shading style to apply to the pie.
Start Position
Select the position relative to an analogue clock face that the first segment in the pie should start.
Explode Slice
Define which segment(s) of the pie should be split from the main pie.
Depth Factor
Select the percentage of the chart display to be used for the 3D height of the pie.
Keep Circular
Display the pie to fill the full chart area. This means the pie may be stretched so there is no empty space.
Hollow Shapes
Display the line shapes with a solid colour centre at each data point, or hollow, depending on the selection.
Curved Lines
Display straight or curved lines between each data point, depending on the selection.
Total Value
Define the total value contained in the proportional infographic image. If left blank the series total will be used. If the series total is less, there will be 'empty colour' for the rest of the image. If it is more, everything after the specified value will be ignored.
Empty Colour
Define the colour to be displayed if the specified Total Value is not met by the selected series.
Orientation
The image used by the proportional infographic will be filled from the top down.
Scale
Display a scale above the comparative infographic that shows the min and max values, and the central point.
Scale Font
Define the formatting for text displayed above the comparative infographic images.
Label Font
Define the formatting for the label text displayed below the comparative infographic images.
Text Font
Define the formatting for text displayed above the comparative infographic images.
Maintain Aspect Ratio
DDisplay the raster map using the same aspect ratio as the original image. This means that it will not be stretched and as such may leave some empty space.
Border Colour
Define a colour to be used as an outline for each region on the map.
Option |
Description |
---|---|
Shading |
Define whether the area has shading or is a solid colour. |
Curved |
Define whether the corners to the bars/columns will be curved or squared. |
Glow |
Define whether the bars/columns will have a glow applied. |
Shadows |
Define whether the bars/columns have a shadow applied. |
Colour Set |
The colour applied to this chart will be based the selection made. Possible options are; Metric, Monochrome, Configuration Defaults.
|
Colour |
This is only available if Monochrome is selected above. Define the colour to be used for monochromatic colouring of the chart. |
Opacity |
Select the opacity percentage of the chart. The lower the percentage, the more transparent it is. |
Other Segment |
Select the % of total a segment must be smaller than in order to be grouped into an 'Other' segment. If 0 there is no grouping. |
Shadow Colour |
Define the colour of the shadow effect applied to the pie. |
Outline Colour |
Define the colour of the outline of the pie and segments. |
Outline Width |
Define the width of the outline of the pie and segments. |
Pie Shading Style |
Define the shading style to apply to the pie. |
Start Position |
Select the position relative to an analogue clock face that the first segment in the pie should start. |
Explode Slice |
Define which segment(s) of the pie should be split from the main pie. |
Depth Factor |
Select the percentage of the chart display to be used for the 3D height of the pie. |
Keep Circular |
Display the pie to fill the full chart area. This means the pie may be stretched so there is no empty space. |
Hollow Shapes |
Display the line shapes with a solid colour centre at each data point, or hollow, depending on the selection. |
Curved Lines |
Display straight or curved lines between each data point, depending on the selection. |
Total Value |
Define the total value contained in the proportional infographic image. If left blank the series total will be used. If the series total is less, there will be 'empty colour' for the rest of the image. If it is more, everything after the specified value will be ignored. |
Empty Colour |
Define the colour to be displayed if the specified Total Value is not met by the selected series. |
Orientation |
The image used by the proportional infographic will be filled from the top down. |
Scale |
Display a scale above the comparative infographic that shows the min and max values, and the central point. |
Scale Font |
Define the formatting for text displayed above the comparative infographic images. |
Label Font |
Define the formatting for the label text displayed below the comparative infographic images. |
Text Font |
Define the formatting for text displayed above the comparative infographic images. |
Maintain Aspect Ratio |
DDisplay the raster map using the same aspect ratio as the original image. This means that it will not be stretched and as such may leave some empty space. |
Border Colour |
Define a colour to be used as an outline for each region on the map. |
Option
Description
Visible Series Selection
Define whether the user can select which series to display when viewing the report.
Series Selection Style
Only available on Time Series charts, select from different display options for the series selection.
Link Field
Select a field formatted to contain a URL in order to use it as a link on the chart.
Visible Unit Selection
Allow users to change the granularity of the dates to be displayed. Selecting a unit of finer granularity than your data will result in using the level of your data.
Date Slider
Display a date slider on the chart to allow users to adjust the date range of the chart.
Slider Position
Define where the date slider will be displayed on the chart.
Slider Initial Range
Specify the percentage of the available date range the slider is set to when the chart loads.
Bottom Navigation
Display navigation buttons in a bar directly below the map.
Hover Navigation
Display navigation hovered over the top left of the map.
Hover Navigation Colour
Select the colour of the navigation hovered over the top left of the map.
Option |
Description |
---|---|
Visible Series Selection |
Define whether the user can select which series to display when viewing the report. |
Series Selection Style |
Only available on Time Series charts, select from different display options for the series selection. |
Link Field |
Select a field formatted to contain a URL in order to use it as a link on the chart. |
Visible Unit Selection |
Allow users to change the granularity of the dates to be displayed. Selecting a unit of finer granularity than your data will result in using the level of your data. |
Date Slider |
Display a date slider on the chart to allow users to adjust the date range of the chart. |
Slider Position |
Define where the date slider will be displayed on the chart. |
Slider Initial Range |
Specify the percentage of the available date range the slider is set to when the chart loads. |
Bottom Navigation |
Display navigation buttons in a bar directly below the map. |
Hover Navigation |
Display navigation hovered over the top left of the map. |
Hover Navigation Colour |
Select the colour of the navigation hovered over the top left of the map. |
Option
Description
Latitude
Define the latitude boundaries of the map. This allows you to reduce the area displayed on the map.
Longitude
Define the longitude boundaries of the map. This allows you to reduce the area displayed on the map.
Option |
Description |
---|---|
Latitude |
Define the latitude boundaries of the map. This allows you to reduce the area displayed on the map. |
Longitude |
Define the longitude boundaries of the map. This allows you to reduce the area displayed on the map. |
Option
Description
Sunday
Define the colour to be applied to the Sunday value row.
Monday
Define the colour to be applied to the Monday value row.
Tuesday
Define the colour to be applied to the Tuesday value row.
Wednesday
Define the colour to be applied to the Wednesday value row.
Thursday
Define the colour to be applied to the Thursday value row.
Friday
Define the colour to be applied to the Friday value row.
Saturday
Define the colour to be applied to the Saturday value row.
Option |
Description |
---|---|
Sunday |
Define the colour to be applied to the Sunday value row. |
Monday |
Define the colour to be applied to the Monday value row. |
Tuesday |
Define the colour to be applied to the Tuesday value row. |
Wednesday |
Define the colour to be applied to the Wednesday value row. |
Thursday |
Define the colour to be applied to the Thursday value row. |
Friday |
Define the colour to be applied to the Friday value row. |
Saturday |
Define the colour to be applied to the Saturday value row. |
Option
Description
Show Median
Enable/disable the display of the median value for each label row.
Show Mean
Enable/disable the display of the mean value for each label row.
Option |
Description |
---|---|
Show Median |
Enable/disable the display of the median value for each label row. |
Show Mean |
Enable/disable the display of the mean value for each label row. |
Option
Description
Bin Count
The number of bins, or intervals, is based on the number of unique values in the dataset.
Option |
Description |
---|---|
Bin Count |
The number of bins, or intervals, is based on the number of unique values in the dataset. |
Option
Description
Up Colour
Define the colour to fill the candlestick when displaying an upwards trend value.
Down Colour
Define the colour to fill the candlestick when displaying a downwards trend value.
Line Colour
Define the colour to be used for the line or border.
Colour
Define the colour to be used for the volume columns.
Axis Position
Display the vertical axis of the volume columns on the left or right of the chart.
Option |
Description |
---|---|
Up Colour |
Define the colour to fill the candlestick when displaying an upwards trend value. |
Down Colour |
Define the colour to fill the candlestick when displaying a downwards trend value. |
Line Colour |
Define the colour to be used for the line or border. |
Colour |
Define the colour to be used for the volume columns. |
Axis Position |
Display the vertical axis of the volume columns on the left or right of the chart. |
Title
Legend
Axis
Background
Labels
Series
GIS Settings
Combination Charts