30日間の無料評価版をお試しいただけます。


ユーザー複製とは、サードパーティ製アプリケーション内の各ユーザーを、Yellowfinの指名ユーザーと同期させることを指します。

これによりYellowfinは、ログインしているユーザーを識別し、必要に応じて、制限を適用することができます。同期は通常、サードパーティ製アプリケーションからYellowfinへのWebサービスの呼び出しを使用して実行されます。サードパーティ製アプリケーションのユーザーが静的である場合は、これを手動で管理することもできます。

こちらのセクションでは、Webサービスを介したユーザーの作成、操作、および削除方法について紹介します。こちらでは、サードパーティ製アプリケーションでユーザーの変更が行われるとすぐに、Webサービスが呼び出され、ユーザーの変更がミラーリングされることを想定しています。

主なユーザー管理関数


こちらの関数は、Yellowfinに新規ユーザーアカウントを作成します。


リクエストパラメーター

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

Yellowfin Webサービスの管理者ユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「ADDUSER」に設定します。

Person

AdministrationPerson

ユーザー作成プロセスに関する新規ユーザーの詳細のすべてを含むオブジェクトです。以下のを参照してください。

OrgRefString

クライアント組織内部参照IDです(こちらの設定はオプションです)。こちらは、参照されるクライアント組織に新規ユーザーを作成します。こちらを設定しない場合、新規ユーザーはデフォルト(プライマリー)組織内に作成されます。

以下は、新規ユーザーを作成するために、「AdministrationPerson」オブジェクトに設定しなくてはいけない必須のパラメーターです。

AdministrationPerson 要素データ型説明

UserId

String

新規ユーザーのユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

Password

String

新規ユーザーのパスワードです。こちらは、Yellowfinのパスワードポリシーに準拠する必要があります。

FirstName

String

新規ユーザーの名です。

LastName

String

新規ユーザーの姓です。

RoleCode

String

新規ユーザーのロールを設定します。例:YFREPORTCONSUMER

注意:リポジトリデータベースから、Yellowfinのロールコードの一覧を取得することができます。例:SQLクエリーを使用する場合:SELECT * FROM OrgRole

EmailAddress

String

新規ユーザーの電子メールアドレスです。


リクエストの例

以下のSOAP XMLの例は、この呼び出しに渡すことのできるパラメーターを表示しています。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>ADDUSER</function>       
            <person>
                <userId>binish.sheikh@yellowfin.com.au</userId>
                <emailAddress>binish.sheikh@yellowfin.com.au</emailAddress>
                <password>admin</password>
                <firstName>Binish</firstName>
                <lastName>Sheikh</lastName>
                <roleCode>YFREPORTCONSUMER</roleCode>
            </person>         
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答パラメーター

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE


応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Creating New User via Webservices...</messages>
            <messages>Creating SessionBean for webservices user...</messages>
            <messages>Looking up user...</messages>
            <messages>Web Service Request Complete</messages>
            <sessionId>8090cb7879f7d5e72eab9625772c00b5</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、Yellowfinの新規ユーザーを作成する基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
    
    
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
    
    rsr.setFunction("ADDUSER");


  • 特定のクライアント組織に新規ユーザーを作成する場合は、こちらをコードに追加します。

    rsr.setOrgRef("org1");      // A new user will be added to the client org with "org1" as an organization reference ID


    orgRefパラメーターを定義しない場合は、新規ユーザーはデフォルト(プライマリー)組織内に作成されます。


  • ADDUSER関数は、新規Yellowfinユーザーの詳細を定義するために、AdministrationPersonオブジェクトを要求します。

    AdministrationPerson ap = new AdministrationPerson();
  • 新規ユーザーを作成するには、これら必須パラメーターの提供が必要です。:UserId、FirstName、LastName、RoleCode、Password、EmailAddress

    ap.setUserId("john.smith@yellowfin.com.au");      // if Yellowfin authentication option is set to "email address"
    ap.setFirstName("John");
    ap.setLastName("Smith");
    ap.setRoleCode("YFREPORTCONSUMER");                // Yellowfin role codes can be found performing this query against
                                                       // Yellowfin configuration database: SELECT * FROM OrgRole
    
    ap.setPassword("test");                              // Password must comply with your Yellowfin password policy
    ap.setEmailAddress("john.smith@yellowfin.com.au");

    AdministrationPersonオブジェクトのその他のパラメーターの設定はオプションです。


  • リクエストに「ap」オブジェクトを渡します。

    rsr.setPerson(ap);
  • リクエストを構成したら、呼び出しを実行します。

    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 返される応答には、StatusCodeパラメーターが含まれます。詳細については、上記の応答パラメーターの表を参照してください。


完成例

以下は、ADDUSER関数の完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_adduser.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_adduser.jsp」を実行します。


<%           
/*              ws_adduser.jsp                */
%>
 
 
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
 
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
 
rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web service admin account
rsr.setPassword("test");                           // change this to the password of the above account
rsr.setOrgId(1);
rsr.setFunction("ADDUSER");
 
 
AdministrationPerson ap = new AdministrationPerson();
 
 
ap.setUserId("john.smith@yellowfin.com.au");      // If Yellowfin authentication option is set to "email address"
ap.setFirstName("John");
ap.setLastName("Smith");
ap.setRoleCode("YFREPORTCONSUMER");                // Yellowfin role codes can be found performing this query against
                                                   // Yellowfin configuration database: SELECT * FROM OrgRole
 
ap.setPassword("test");                          // Password must comply with your Yellowfin password policy
ap.setEmailAddress("john.smith@yellowfin.com.au");
rsr.setPerson(ap);
 
 
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
if
("SUCCESS".equals(rs.getStatusCode()) ) {
    out.write("Success");
} else {
    out.write("Failure");
    out.write(" Code: " + rs.getErrorCode());
}
%>

こちらの関数は、一度に複数のユーザーを作成します。ADDUSER関数と類似していますが、こちらの関数は、AdministrationPersonオブジェクトの配列を渡すよう要求します。


リクエストパラメーター

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

Yellowfin Webサービスの管理者ユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「ADDUSERS」に設定します。

Person

AdministrationPerson[]

一度に追加されるユーザーの詳細を含むオブジェクト配列です。以下のを参照してください。

OrgRefString

クライアント組織内部参照IDです(こちらの設定はオプションです)。こちらは、参照されるクライアント組織に新規ユーザーを作成します。こちらを設定しない場合、新規ユーザーはデフォルト(プライマリー)組織内に作成されます。

以下は、新規ユーザーを作成するために、「AdministrationPerson」オブジェクトに設定しなくてはいけない必須のパラメーターです。

AdministrationPerson 要素データ型説明

UserId

String

新規ユーザーのユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

Password

String

新規ユーザーのパスワードです。こちらは、Yellowfinのパスワードポリシーに準拠する必要があります。

FirstName

String

新規ユーザーの名です。

LastName

String

新規ユーザーの姓です。

RoleCode

String

新規ユーザーのロールを設定します。例:YFREPORTCONSUMER

注意:リポジトリデータベースから、Yellowfinのロールコードの一覧を取得することができます。例:SQLクエリーを使用する場合:SELECT * FROM OrgRole

EmailAddress

String

新規ユーザーの電子メールアドレスです。


応答パラメーター

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、Yellowfinの新規ユーザーを作成する基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("ADDUSERS");
  • 特定のクライアント組織に新規ユーザーを作成する場合は、こちらをコードに追加します。

    rsr.setOrgRef("org1");


    orgRefパラメーターを定義しない場合は、新規ユーザーはデフォルト(プライマリー)組織内に作成されます。


  • 新規Yellowfinユーザーの詳細を定義するために、AdministrationPersonオブジェクトを使用します。

    AdministrationPerson[] ap = new AdministrationPerson[2];
  • これらの必須パラメーターを提供することで、最初のユーザーの詳細を追加します。:UserId、FirstName、LastName、RoleCode、Password、EmailAddress

    ap[0] = new AdministrationPerson();
    ap[0].setUserId("user1@yellowfin.com.au");        
    ap[0].setFirstName("user1");
    ap[0].setLastName("Lastname1");
    ap[0].setRoleCode("YFREPORTCONSUMER");         
    ap[0].setPassword("test");                                
    ap[0].setEmailAddress("user1@yellowfin.com.au");

    AdministrationPersonオブジェクトのその他のパラメーターの設定はオプションです。


  • 同様に、他のユーザーの詳細を提供します。


    ap[1] = new AdministrationPerson();
    ap[1].setUserId("user2@yellowfin.com.au");        
    ap[1].setFirstName("user2");
    ap[1].setLastName("Lastname2");
    ap[1].setRoleCode("YFREPORTCONSUMER");         
    ap[1].setPassword("test");                                
    ap[1].setEmailAddress("user2@yellowfin.com.au");

    これを、必要なユーザー分繰り返します。


  • リクエストに「ap」オブジェクトを渡します。

    rsr.setPeople(ap);
  • リクエストを構成したら、呼び出しを実行します。

    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 返される応答には、StatusCodeパラメーターが含まれます。詳細については、上記の応答パラメーターの表を参照してください。


完成例

以下は、ADDUSERS関数の完成例です。今回の例では、デフォルト組織に、user1@yellowfin.com.auとuser2@yellowfin.com.auという2つの新規ユーザーを追加します。

こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_addusers.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_addusers.jsp」を実行します。


<%           
/*              ws_addusers.jsp               */
%>
 
 
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
 
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
rsr.setPassword("test");                           // change to the password of the above account
rsr.setOrgId(1);
rsr.setFunction("ADDUSERS");
 
AdministrationPerson[] ap = new AdministrationPerson[2];
 
ap[0] = new AdministrationPerson();
ap[0].setUserId("user1@yellowfin.com.au");        
ap[0].setFirstName("user1");
ap[0].setLastName("Lastname1");
ap[0].setRoleCode("YFREPORTCONSUMER");         
ap[0].setPassword("test");                                
ap[0].setEmailAddress("user1@yellowfin.com.au");
 
ap[1] = new AdministrationPerson();
ap[1].setUserId("user2@yellowfin.com.au");        
ap[1].setFirstName("user2");
ap[1].setLastName("Lastname2");
ap[1].setRoleCode("YFREPORTCONSUMER");         
ap[1].setPassword("test");                                
ap[1].setEmailAddress("user2@yellowfin.com.au");
 
 
rsr.setPeople(ap);
 
 
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
if
("SUCCESS".equals(rs.getStatusCode() ) ) {
    out.write("Success");
} else {
    out.write("Failure");
out.write("Code: " + rs.getErrorCode() );
}
%>

こちらの関数は、重複を追加することなく、一度に複数のユーザーを作成します。ADDUSERS関数と同様に機能しますが、作成しようとしているユーザーのログインIDや電子メールアドレスが既に使用されていたり、パスワードが提供されない場合は、「例外なし」エラーが発生し、ユーザーは作成されません。応答には、追加されなかったユーザーとともに、AdministrationPersonオブジェクトが含まれます。


リクエストパラメーター

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

Yellowfin Webサービスの管理者ユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「ADDUSERSIGNREDUPLICATES」に設定します。

Person

AdministrationPerson[]

一度に追加され、重複を検証されるユーザーの詳細を含むオブジェクト配列です。以下のを参照してください。

OrgRefString

クライアント組織内部参照IDです(こちらの設定はオプションです)。こちらは、参照されるクライアント組織に新規ユーザーを作成します。こちらを設定しない場合、新規ユーザーはデフォルト(プライマリー)組織内に作成されます。

以下は、新規ユーザーを作成するために、「AdministrationPerson」オブジェクトに設定しなくてはいけない必須のパラメーターです。

AdministrationPerson 要素データ型説明

UserId

String

新規ユーザーのユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

Password

String

新規ユーザーのパスワードです。こちらは、Yellowfinのパスワードポリシーに準拠する必要があります。

FirstName

String

新規ユーザーの名です。

LastName

String

新規ユーザーの姓です。

RoleCode

String

新規ユーザーのロールを設定します。例:YFREPORTCONSUMER

注意:リポジトリデータベースから、Yellowfinのロールコードの一覧を取得することができます。例:SQLクエリーを使用する場合:SELECT * FROM OrgRole

EmailAddress

String

新規ユーザーの電子メールアドレスです。


応答パラメーター

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE
PeopleAdministrationPerson[]アカウントが作成されなかったユーザーです。


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、Yellowfinの新規ユーザーを作成する基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("ADDUSERSIGNOREDUPLICATES");
  • 特定のクライアント組織に新規ユーザーを作成する場合は、こちらをコードに追加します。

    rsr.setOrgRef("org1");


    orgRefパラメーターを定義しない場合は、新規ユーザーはデフォルト(プライマリー)組織内に作成されます。


  • 新規Yellowfinユーザーの詳細を定義するために、AdministrationPersonオブジェクトを使用します。

    AdministrationPerson[] ap = new AdministrationPerson[2];
  • これらの必須パラメーターを提供することで、最初のユーザーの詳細を追加します。:UserId、FirstName、LastName、RoleCode、Password、EmailAddress

    ap[0] = new AdministrationPerson();
    ap[0].setUserId("user1@yellowfin.com.au");        
    ap[0].setFirstName("user1");
    ap[0].setLastName("Lastname1");
    ap[0].setRoleCode("YFREPORTCONSUMER");         
    ap[0].setPassword("test");                                
    ap[0].setEmailAddress("user1@yellowfin.com.au");

    AdministrationPersonオブジェクトのその他のパラメーターの設定はオプションです。


  • 同様に、他のユーザーの詳細を提供します。


    ap[1] = new AdministrationPerson();
    ap[1].setUserId("user2@yellowfin.com.au");        
    ap[1].setFirstName("user2");
    ap[1].setLastName("Lastname2");
    ap[1].setRoleCode("YFREPORTCONSUMER");         
    ap[1].setPassword("test");                                
    ap[1].setEmailAddress("user2@yellowfin.com.au");

    これを、必要なユーザー分繰り返します。


  • リクエストに「ap」オブジェクトを渡します。

    rsr.setPeople(ap);
  • リクエストを構成したら、呼び出しを実行します。

    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 返される応答には、StatusCodeとPeopleパラメーターが含まれます。詳細については、上記の応答パラメーターの表を参照してください。


  • 追加されなかったユーザーを取得するには、こちらのコマンドを使用します。

    AdministrationPerson[] failed_users = rs.getPeople();

こちらの関数は、指定されたユーザーをYellowfinから削除します。注意:クライアント組織からユーザーを削除するには、「REMOVEUSERACCESS」の呼び出しを実行します。


リクエスト要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

Yellowfin Webサービスの管理者ユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「DELETEUSER」、または「DELUSER」に設定します。

Person

AdministrationPerson[]

削除されるユーザーアカウントの詳細を含むオブジェクトです。以下のを参照してください。

OrgRefString

クライアント組織内部参照IDです(こちらの設定はオプションです)。指定したクライアント組織にユーザーをログインさせます。こちらを設定しない場合、ユーザーはログイン先を指定するために、クライアント組織選択ページへ移動します。

以下は、「AdministrationPerson」オブジェクトに設定しなくてはいけないパラメーターです。

AdministrationPerson 要素データ型説明

UserId

String

削除するユーザーのユーザーIDです。こちらのユーザーは、既にYellowfinインスタンス内に存在していなくてはいけません。

これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。


リクエストの例

以下のSOAPの例は、こちらの呼び出しに渡すことのできるパラメーターを表示しています。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>DELETEUSER</function>       
            <person>
                <userId>binish.sheikh@yellowfin.com.au</userId>
            </person>         
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答要素

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE


応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Web Service Request Complete</messages>
            <sessionId>cc8c2b81d06485fdd20fe4cd24f5f70c</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、この呼び出しの基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("DELETEUSER");
  • 関数は、削除するユーザーの指定に使用するAdministrationPersonオブジェクトを要求するので、ID(例:電子メールアドレスや、その他タイプのIDなど、ログインID方法に応じたID)を提供します。


    AdministrationPerson ap = new AdministrationPerson();
    
    ap.setUserId("test@yellowfin.com.au");                   // test@yellowfin.com.au should be an existing Yellowfin user.
    rsr.setPerson(ap);
  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 応答には、StatusCodeパラメーターが含まれます。より詳細な情報は、上記の応答パラメーターの表を参照してください。


完成例

以下は、DELETEUSER関数の完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_deleteuser.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_deleteuser.jsp」を実行します。


<%           
/*              ws_deleteuser.jsp              */
%>
 
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
 
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
 
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
rsr.setPassword("test");                           // change to the password of the above account
rsr.setOrgId(1);
rsr.setFunction("DELETEUSER");
 
 
AdministrationPerson ap = new AdministrationPerson();
 
ap.setUserId("test@yellowfin.com.au");
rsr.setPerson(ap);
 
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
 
if ("SUCCESS".equals(rs.getStatusCode() ) ) {
    out.write("Success");
} else {
    out.write("Failure");
    out.write(" Code: " + rs.getErrorCode() );
}
%>

ユーザー情報の取得と検証

ユーザー作成後は、Webサービスの呼び出しを使用してユーザーの詳細を取得することができます。「AdministrationPerson」オブジェクトのUser IDフィールドは、ユーザーを識別するために使用されます。結果として、投入された「AdministrationPerson」オブジェクトが返されます。セキュリティ上の理由からパスワードは返されず、「NULL」になります。ユーザー情報は、こちらの項目内のアプリケーションに照らし合わせて検証することもできます。


こちらの関数は、既存のYellowfinユーザーの詳細を取得します。これは、AdministrationPersonオブジェクトを、ユーザーの識別に使用できるパラメーターとして受け付けます。応答には、ユーザー詳細のすべてが含まれたAdministrationPersonオブジェクトが含まれます。


リクエスト要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

ログインをして、この関数を実行する、Webサービス管理者ユーザーのIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、GETUSER」に設定します。

Person

AdministrationPerson

情報が取得されるユーザーの詳細を含むオブジェクトです。注意:以下のを参照してください。

OrgRefString クライアント組織内部参照IDです(こちらの設定はオプションです)。指定したクライアント組織にユーザーをログインさせます。こちらを設定しない場合、ユーザーはログイン先を指定するために、クライアント組織選択ページへ移動します。

以下は、こちらの関数のために「AdministrationPerson」オブジェクトに設定しなくてはいけない主要なパラメーターです。

AdministrationPerson要素データ型説明

UserId

String

情報が取得されるユーザーのユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスにすることができます。


リクエストの例

以下のSOAPの例は、こちらの呼び出しに渡すことのできるパラメーターを表示しています。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>GETUSER</function>       
            <person>
                <userId>admin@yellowfin.com.au</userId>
            </person>         
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答の要素

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE

Person

AdministrationPerson

ユーザー詳細を含むオブジェクトです。


応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Getting user information...</messages>
            <messages>Getting user information...</messages>
            <messages>Web Service Request Complete</messages>
            <person>
               <emailAddress>admin@yellowfin.com.au</emailAddress>
               <firstName>System</firstName>
               <initial/>
               <ipId>5</ipId>
               <languageCode>EN</languageCode>
               <lastName>Administrator</lastName>
               <roleCode>YFADMIN</roleCode>
               <salutationCode/>
               <status>ACTIVE</status>
               <timeZoneCode>AUSTRALIA/SYDNEY</timeZoneCode>
               <userId>admin@yellowfin.com.au</userId>
            </person>
            <sessionId>70dc3c7158a340e19b590f0ed6ea6a8b</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、この呼び出しの基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("GETUSER");
  • AdministrationPersonオブジェクトを介して、ユーザーIDを提供します。


    AdministrationPerson ap = new AdministrationPerson();
    ap.setUserId("john.smith@yellowfin.com.au");
    rsr.setPerson(ap);
  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 応答には、StatusCodeとPersonパラメーターが含まれます。より詳細な情報は、応答パラメーターの表を参照してください。


  • 取得したユーザーの詳細を表示するには、以下の例を使用します。

    if ("SUCCESS".equals(rs.getStatusCode()) ) {
        ap = rs.getPerson();
        out.write("UserId:" + ap.getUserId() + "<br>");
        out.write("Password:" + ap.getPassword() + "<br>");
        out.write("FirstName:" + ap.getFirstName() + "<br>");
        out.write("LastName:" + ap.getLastName() + "<br>");
        out.write("Initial:" + ap.getInitial() + "<br>");
        out.write("SalutationCode:" + ap.getSalutationCode() + "<br>");
        out.write("RoleCode:" + ap.getRoleCode() + "<br>");
        out.write("EmailAddress:" + ap.getEmailAddress() + "<br>");
        out.write("LanguageCode:" + ap.getLanguageCode() + "<br>");
        out.write("IpId:" + ap.getIpId() + "<br>");
        out.write("TimeZoneCode:" + ap.getTimeZoneCode() + "<br>");
        out.write("Status:" + ap.getStatus() + "<br>");
    } else {
        out.write("Failure");
        out.write(" Code: " + rs.getErrorCode());
    }

      

完成例

以下は、GETUSER関数の完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_getuser.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_getuser.jsp」を実行します。


<%           
/*              ws_getuser.jsp              */
%>
 
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
rsr.setPassword("test");                           // change to the password of the above account
rsr.setOrgId(1);
rsr.setFunction("GETUSER");
 
AdministrationPerson ap = new AdministrationPerson();
ap.setUserId("john.smith@yellowfin.com.au");
rsr.setPerson(ap);
 
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
if ("SUCCESS".equals(rs.getStatusCode()) ) {
    ap = rs.getPerson();
    out.write("User Id:" + ap.getUserId() + "<br>");
    out.write("Password:" + ap.getPassword() + "<br>");
    out.write("First Name:" + ap.getFirstName() + "<br>");
    out.write("Last Name:" + ap.getLastName() + "<br>");
    out.write("Initial:" + ap.getInitial() + "<br>");
    out.write("Salutation Code:" + ap.getSalutationCode() + "<br>");
    out.write("Role Code:" + ap.getRoleCode() + "<br>");
    out.write("Email Address:" + ap.getEmailAddress() + "<br>");
    out.write("Language Code:" + ap.getLanguageCode() + "<br>");
    out.write("IpId:" + ap.getIpId() + "<br>");
    out.write("Time Zone Code:" + ap.getTimeZoneCode() + "<br>");
    out.write("Status:" + ap.getStatus() + "<br>");
} else {
    out.write("Failure");
    out.write(" Code: " + rs.getErrorCode() );
}
%>

こちらの関数は、指定されたクライアント組織内の、すべてのユーザーの詳細を取得します。情報は、AdministrationPersonオブジェクトの配列で取得されます。クライアント組織を指定しない場合は、すべてのユーザーが取得されます。取得するユーザーの検索基準を指定するために、「setParameters()」メソッドを使用することができます。セキュリティ上の理由からパスワードは返されず、「NULL」になります。


リクエスト要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

ログインをして、この関数を実行する、Webサービス管理者ユーザーのIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「GETUSER」に設定します。

ClientAdministrationClientOrg

 (オプション設定)このオブジェクトに必要なプロパティを設定すると、検索するクライアント組織が指定されます。設定しない場合は、すべてのクライアント組織が検索されます。詳細は以下の表を参照してください。


AdministrationClientOrg 要素データ型説明
ClientReferenceIDString検索されるクライアント組織の内部参照IDです。


リクエストの例

以下のSOAPの例は、こちらの呼び出しに渡すことのできるパラメーターを表示しています。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>GETALLUSERS</function>
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答の要素

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE

People

AdministrationPerson

ユーザー詳細を含むオブジェクトの配列です。


応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Web Service Request Complete</messages>
            <people>
               <firstName>System</firstName>
               <ipId>5</ipId>
               <lastName>Administrator</lastName>
               <userId>admin@yellowfin.com.au</userId>
            </people>
            <sessionId>2c32528279baa26b730f9e3c8787880d</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、すべてのユーザーを取得するリクエストの例であり、管理ユーザーとしてのログインを含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
  • クライアント組織を指定しない場合は、すべてのクライアント組織が検索されます。


    AdministrationClientOrg client = new AdministrationClientOrg();
    client.setClientReferenceId("org1");
    rsr.setClient(client);
  • 関数を呼び出します。

    rsr.setFunction("GETALLUSERS");
  • 検索基準:GETALLUSERS関数は、2つの文字列の配列を受け付けます。最初の配列(searchingCriteria[0])は、「%John%」のような条件を使用して、Yellowfinデータベースユーザーの名、姓、電子メールの@よりも左側、または右側と比較されます。次の配列(seachingCriteria[1])は、Yellowfinデータベースユーザーの電子メール右側(ドメイン)と比較されます。


    String[] searchingCriteria = new String[] {"John","yellowfin.com.au"};
    rsr.setParameters(searchingCriteria);
  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 応答には、StatusCodeとPeopleパラメーターが含まれます。より詳細な情報は、上記の応答パラメーターの表を参照してください。

完成例

以下は、GETALLUSERS関数の完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_getallusers.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_getallusers.jsp」を実行します。


<%           
/*              ws_getallusers.jsp               */
%>
 
 
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
rsr.setLoginId("admin@yellowfin.com.au");
rsr.setPassword("test");
rsr.setOrgId(1);
 
AdministrationClientOrg client = new AdministrationClientOrg();
client.setClientReferenceId("org1");
rsr.setClient(client);
 
rsr.setFunction("GETALLUSERS");
 
String[] searchingCriteria = new String[] {"John","yellowfin.com.au"};
rsr.setParameters(searchingCriteria);
 
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
if ("SUCCESS".equals(rs.getStatusCode()) ) {
    out.write("Success. " + rs.getPeople().length + " people found.");
} else {
    out.write("Failure");
    out.write(" Code: " + rs.getErrorCode() );
}
%>

こちらの関数は、IPを使用して、ユーザーの詳細を取得します。関数は、IPID(Yellowfinリポジトリデータベース内で、これはPersonテーブルのIpIdフィールドになります)を提供することで、ユーザー指定に使用するためのAdministrationPersonオブジェクトを、パラメーターとして受け付けます。応答には、すべてのユーザー詳細を含むAdministrationPersonオブジェクトが含まれます。


リクエスト要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型

説明

LoginId

String

ログインをして、この関数を実行する、Webサービス管理者ユーザーのIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「GETUSERBYIP」に設定します。

PersonAdministrationPerson情報が取得されるユーザーの詳細を含むオブジェクトです。注意:以下のを参照してください。

以下は、こちらの関数のために「AdministrationPerson」オブジェクトに設定しなくてはいけない主要なパラメーターです。

AdministrationPerson要素データ型説明
IpIdInteger情報が取得されるユーザーのIP IDです。


リクエストの例

以下のSOAPの例は、こちらの呼び出しに渡すことのできるパラメーターを表示しています。

 <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>GETUSERBYIP</function>
          <person>
                <ipId>5</ipId>
            </person>
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答の要素

返される応答には、これらののパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE

Person

AdministrationPerson

ユーザー詳細を含むオブジェクトです。


応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Getting user information...</messages>
            <messages>Getting user information...</messages>
            <messages>Web Service Request Complete</messages>
            <person>
               <emailAddress>admin@yellowfin.com.au</emailAddress>
               <firstName>System</firstName>
               <initial/>
               <ipId>5</ipId>
               <languageCode>EN</languageCode>
               <lastName>Administrator</lastName>
               <roleCode>YFADMIN</roleCode>
               <salutationCode/>
               <status>ACTIVE</status>
               <timeZoneCode>AUSTRALIA/SYDNEY</timeZoneCode>
               <userId>admin@yellowfin.com.au</userId>
            </person>
            <sessionId>81e76f1222d0dd12d9871efc7cbf0811</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、この呼び出しの基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("GETUSERBYIP");
  • IpIdを提供し、詳細を取得するユーザーを識別するために、AdministrationPersonオブジェクトを使用します。


    AdministrationPerson ap = new AdministrationPerson();
     
    ap.setIpId(5);                  //IpId of the admin@yellowfin.com.au account
    rsr.setPerson(ap);
  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 応答には、StatusCodeとPersonパラメーターが含まれます。より詳細な情報は、上記の応答パラメーターの表を参照してください。


  • この呼び出しの結果を表示するには、以下の例を使用します。

    if ("SUCCESS".equals(rs.getStatusCode()) ) {
        ap = rs.getPerson();
        out.write("UserId: " + ap.getUserId() + "<br>");
        out.write("Password: " + ap.getPassword() + "<br>");
        out.write("FirstName: " + ap.getFirstName() + "<br>");
        out.write("LastName: " + ap.getLastName() + "<br>");
        out.write("Initial: " + ap.getInitial() + "<br>");
        out.write("SalutationCode: " + ap.getSalutationCode() + "<br>");
        out.write("RoleCode: " + ap.getRoleCode() + "<br>");
        out.write("EmailAddress: " + ap.getEmailAddress() + "<br>");
        out.write("LanguageCode: " + ap.getLanguageCode() + "<br>");
        out.write("IpId: " + ap.getIpId() + "<br>");
        out.write("TimeZoneCode: " + ap.getTimeZoneCode() + "<br>");
        out.write("Status: " + ap.getStatus() + "<br>");
    } else {
        out.write("Failure");
        out.write(" Code: " + rs.getErrorCode());
    }

完成例

以下は、GETUSERBYIP関数の完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_getuserbyip.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_getuserbyip.jsp」を実行します。


<%           
/*              ws_getuserbyip.jsp                  */
%>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
 
 
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
rsr.setPassword("test");                           // change to the password of the above account
rsr.setOrgId(1);
rsr.setFunction("GETUSERBYIP");
 
AdministrationPerson ap = new AdministrationPerson();
 
ap.setIpId(5);
rsr.setPerson(ap);
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
if ("SUCCESS".equals(rs.getStatusCode()) ) {
    ap = rs.getPerson();
    out.write("User Id: " + ap.getUserId() + "<br>");
    out.write("Password: " + ap.getPassword() + "<br>");
    out.write("First Name: " + ap.getFirstName() + "<br>");
    out.write("Last Name: " + ap.getLastName() + "<br>");
    out.write("Initial: " + ap.getInitial() + "<br>");
    out.write("Salutation Code: " + ap.getSalutationCode() + "<br>");
    out.write("Role Code: " + ap.getRoleCode() + "<br>");
    out.write("Email Address: " + ap.getEmailAddress() + "<br>");
    out.write("Language Code: " + ap.getLanguageCode() + "<br>");
    out.write("IpId: " + ap.getIpId() + "<br>");
    out.write("Time Zone Code: " + ap.getTimeZoneCode() + "<br>");
    out.write("Status: " + ap.getStatus() + "<br>");
} else {
    out.write("Failure");
    out.write(" Code: " + rs.getErrorCode() );
}
%>

こちらのWebサービスは、ユーザーのプロフィール画像を取得するために使用されます。ユーザーがYellowfinにプロフィール画像を設定していない場合は、画像は取得されません。こちらのサービスは、ユーザーの内部ID(IP ID)を要求します。


リクエストパラメーター

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型

説明

LoginId

String

Yellowfin Webサービスに接続する管理者アカウントです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「GETAVATARS」に設定します。

ParametersString[]プロフィール画像を取得するYellowfinユーザーの内部ID(または、IpId)が含まれる配列です。各IDは、Integerのものもすべて、Stringとして渡されなくてはいけません。


リクエストの例

以下は、こちらのリクエストのSOAP XMLの例です。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
           <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>GETAVATARS</function>
            <parameters>5</parameters>
         </arg0>
    </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答のパラメーター

返される応答には、これらののパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE

binaryAttachments

ReportBinaryObject[]

指定したユーザーのプロフィール画像を含みます。


応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <binaryAttachments>
               <data>iVBORw0KGgoAAAANSUhEUgAAA ... your image string</data>
            </binaryAttachments>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Web Service Request Complete</messages>
            <sessionId>5547ebe153fd0fc7fcf63014ffe61b5c</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • 管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含む、こちらの関数の基礎的なリクエストから開始します。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("GETAVATARS");
  • ユーザーのIP IDを指定することができます。


    rsr.setParameters(new String[] {"5","13073"});
  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 応答には、StatusCode要素と、BinaryAttachment配列が含まれます。


  • 最初の画像を取得するためには、以下を使用します。

    byte[] data = response.getBinaryAttachments[0].getData();

完成例

以下は、Webサービスの呼び出しの完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_getavatar.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_getavatar.jsp」を実行します。


<%           
/*              ws_getavatars.jsp              */
%>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<html>
<body>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
rsr.setPassword("test");                           // set to the password of the above account
rsr.setOrgId(1);
 
rsr.setFunction("GETAVATARS");
rsr.setParameters(new String[] {"5","13073"});
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
if ("SUCCESS".equals(rs.getStatusCode()) ) {
    ReportBinaryObject[] objects = rs.getBinaryAttachments();
    if (objects != null) {
        byte[] data,encodeBase64;
        String base64Encoded;
 
        for(ReportBinaryObject o: objects){
            data = o.getData();
            if (data != null){
 
                encodeBase64 = java.util.Base64.getEncoder().encode(data);
                base64Encoded = new String(encodeBase64, "UTF-8");
                if (base64Encoded != null) 
                    out.write("<br>");
                %>
                <img src="data:image/jpg;base64,<%=base64Encoded%>" alt="No image">
                <%
            }
        }
    }
} else {
    out.write("Failure");
    out.write(" Code: " + rs.getErrorCode());
}
%>
</body>
</html> 

こちらの関数は、Yellowfinのユーザーを検証します。AdministrationPersonオブジェクトをパラメーターに使用して、ユーザーを指定することができます。

提供された詳細を持つユーザーが存在する場合、応答はSUCCESSを返します。ユーザーが有効でない場合は、コード25(COULD_NOT_AUTHENTICATE_USER)が応答に返されます。


リクエストの要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

ログインをして、こちらの関数を実行するWebサービス管理者ユーザーのIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「VALIDATEUSER」に設定します。

PersonAdministrationPerson検証されるユーザーの詳細を含むオブジェクトです。注意:以下のを参照してください。

OrgRef

String

クライアント組織参照IDです(こちらの設定はオプションです)。特定の組織のユーザーの検証が必要な場合は、こちらを設定します。

以下は、こちらの関数のために「AdministrationPerson」オブジェクトに設定しなくてはいけない主要なパラメーターです。

AdministrationPerson要素データ型説明

User ID

String

検証するユーザーのユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスにすることができます。

PasswordString上記アカウントのパスワードです。


リクエストの例

以下のSOAPの例は、こちらの呼び出しに渡すことのできるパラメーターを表示しています。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>VALIDATEUSER</function>
          <person>
                <userId>admin@yellowfin.com.au</userId>
                <password>test</password>
            </person>
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答の要素

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE

Person

AdministrationPerson

ユーザー詳細を含むオブジェクトです。



応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Web Service Request Complete</messages>
            <person>
               <ipId>5</ipId>
               <userId>admin@yellowfin.com.au</userId>
            </person>
            <sessionId>0ee8ae23d21ff01f365d1e03ea49c47a</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、この呼び出しの基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("VALIDATEUSER");
  • AdministrationPersonオブジェクトを介して、ユーザーIDを提供します。


    AdministrationPerson ap = new AdministrationPerson();
    
    ap.setUserId("john.smith@yellowfin.com.au");
    ap.setPassword("test");
    
    rsr.setPerson(ap);
  • 特定の組織のユーザーの検証が必要な場合は、クライアント組織参照IDを提供します。


    rsr.setOrgRef("org1");

    OrgRefパラメーターが省略された場合、ユーザーはデフォルト(プライマリー)組織に対して検証されます。


  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 応答には、StatusCodeパラメーターが含まれます。



完成例

以下は、VALIDATEUSER関数の完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_validateuser.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_validateuser.jsp」を実行します。


<%           
/*              ws_validateuser.jsp                */
%>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
rsr.setPassword("test");                           // change to the password of the above account
rsr.setOrgId(1);
rsr.setFunction("VALIDATEUSER");
 
AdministrationPerson ap = new AdministrationPerson();
 
ap.setUserId("john.smith@yellowfin.com.au");
ap.setPassword("test");
 
rsr.setPerson(ap);
rsr.setOrgRef("org1");
 
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
if ("SUCCESS".equals(rs.getStatusCode()) ) {
    out.write("User is authenticated");
} else {
    out.write("Failure");
    out.write(" Code: " + rs.getErrorCode() );
}
%>

こちらの呼び出しは、ユーザーのパスワードを検証します。パスワードの有効期限が切れている場合、StatusCodeとしてSUCCESSを返します。それ以外の場合は、FAILUREを返します。

Yellowfinにログインをしていない新規ユーザーの場合は、パスワードの有効期限が切れているため、呼び出しはSUCCESSを取得します。これは、新規ユーザーの初回ログイン時に、Yellowfinはパスワードのリセットを要求するからです。


リクエストの要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

Yellowfin Webサービス管理者ユーザーのIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「VALIDATE PASSWORD」に設定します。

PersonAdministrationPersonパスワードが検証されるユーザーの詳細を含むオブジェクトです。注意:以下のを参照してください。

以下は、こちらの関数のために「AdministrationPerson」オブジェクトに設定しなくてはいけない主要なパラメーターです。

AdministrationPerson要素データ型説明

UserId

String

パスワードが検証されるユーザーのユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスにすることができます。

Password

String

上記アカウントのパスワードです。


リクエストの例

以下のSOAPの例は、こちらの呼び出しに渡すことのできるパラメーターを表示しています。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>VALIDATEPASSWORD</function>
            <person>
                <userId>admin@yellowfin.com.au</userId>
                <password>test</password>
            </person>
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答の要素

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE


応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Web Service Request Complete</messages>
            <sessionId>fb024963bdc94034557f95b01f53a138</sessionId>
            <statusCode>FAILURE</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、この呼び出しの基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("VALIDATEPASSWORD");
  • AdministrationPersonオブジェクトを介して、ユーザーIDを提供します。


    AdministrationPerson ap = new AdministrationPerson();
    ap.setUserId("john.smith@yellowfin.com.au");
    ap.setPassword("test");
     
    rsr.setPerson(ap);
  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 応答には、StatusCodeパラメーターが含まれます。より詳細な情報は、上記の応答パラメーターの表を参照してください。



完成例

以下は、VALIDATEPASSWORD関数の完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_validatepassword.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_validatepassword.jsp」を実行します。


<%           
/*              ws_validatepwd.jsp                */
%>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
rsr.setPassword("test");                           // change to the password of the above account
rsr.setOrgId(1);
rsr.setFunction("VALIDATEPASSWORD");
 
AdministrationPerson ap = new AdministrationPerson();
 
ap.setUserId("john.smith@yellowfin.com.au");
ap.setPassword("test");
rsr.setPerson(ap);
 
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
if ("SUCCESS".equals(rs.getStatusCode()) ) {
    out.write("Password is expired");
} else {
    out.write("Failure");
    out.write(" Code: " + rs.getErrorCode() );
}
%>

ユーザー情報の操作

ユーザーの詳細は、Webサービスの呼び出しを使用して、後から変更することができます。AdministrationPersonオブジェクトのUser IDフィールドは、ユーザーを識別するために使用されるため、変更することができません。AdministrationPersonオブジェクトのその他のフィールドには、新しい変更内容が投入されます。

こちらの関数は、指定したYellowfinユーザーのパスワードを変更します。パスワードは、ユーザーID(ログインIDの方法に応じて、電子メールアドレス、またはその他のタイプのIDになります。)をもとに、AdministrationPersonパラメーターを通してリセットされます。


リクエストの要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

Yellowfin Webサービス管理者ユーザーのIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「CHANGEPASSWORD」に設定します。

PersonAdministrationPerson

パスワードを変更するユーザーの詳細を含むオブジェクトです。注意:以下のを参照してください。

以下は、こちらの関数のために「AdministrationPerson」オブジェクトに設定しなくてはいけない主要なパラメーターです。

AdministrationPerson要素データ型説明

UserId

String

パスワードを変更するユーザーのユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスにすることができます。

Password

String

ユーザーの新規パスワードです。これは、Yellowfinのパスワードポリシーに準拠していなくてはいけません。


リクエストの例

以下のSOAPの例は、こちらの呼び出しに渡すことのできるパラメーターを表示しています。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>CHANGEPASSWORD</function>
            <person>
                <userId>admin@yellowfin.com.au</userId>
                <password>test321</password>
            </person>
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答の要素

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE


応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Web Service Request Complete</messages>
            <sessionId>f6bdc33348cd76d7898f3bed3e54ff31</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、この呼び出しの基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("CHANGEPASSWORD");
  • AdministrationPersonオブジェクトを使用して、ユーザーを指定します。


    AdministrationPerson ap = new AdministrationPerson();
     
    ap.setUserId("john.smith@yellowfin.com.au");
    ap.setPassword("test123");
    rsr.setPerson(ap);
  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 応答には、StatusCodeパラメーターが含まれます。より詳細な情報は、上記の応答パラメーターの表を参照してください。



完成例

以下は、CHANGEPASSWORD関数の完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_changepassword.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_changepassword.jsp」を実行します。


<%           
/*              ws_changepwd.jsp              */
%>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
rsr.setPassword("test");                           // change to the password of the above account
rsr.setOrgId(1);
rsr.setFunction("CHANGEPASSWORD");
 
AdministrationPerson ap = new AdministrationPerson();
 
ap.setUserId("john.smith@yellowfin.com.au");
ap.setPassword("test123");
 
rsr.setPerson(ap);
 
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
if ("SUCCESS".equals(rs.getStatusCode()) ) {
    out.write("Password is reset");
} else {
    out.write("Failure");
    out.write(" Code: " + rs.getErrorCode() );
}
%>

こちらの関数は、ユーザーのYellowfinアカウントをリセットし、パスワードを変更するよう要求します。この呼び出しがアカウントのパスワードを変更するのではありません。パスワードを変更するには、ユーザー複製と管理サービス#CHANGEPASSWORD関数を使用します。


リクエストの要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

Yellowfin Webサービス管理者ユーザーのIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「RESETPASSWORD」に設定します。

PersonAdministrationPerson

パスワードをリセットしなくてはいけないユーザーの詳細を含むオブジェクトです。注意:以下のを参照してください。

以下は、こちらの関数のために「AdministrationPerson」オブジェクトに設定しなくてはいけない主要なパラメーターです。

AdministrationPerson要素データ型説明

UserId

String

パスワードをリセットするユーザーのユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスにすることができます。

Password

String

上記アカウントのパスワードです。


リクエストの例

以下のSOAPの例は、こちらの呼び出しに渡すことのできるパラメーターを表示しています。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test321</password>
            <orgId>1</orgId>
            <function>RESETPASSWD</function>
            <person>
                <userId>admin@yellowfin.com.au</userId>
                <password>test321</password>
            </person>
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答の要素

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE


応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Web Service Request Complete</messages>
            <sessionId>beabd94a9ffaa562a8b9ba823fc291a0</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、この呼び出しの基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("RESETPASSWD");
  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • この呼び出しの応答には、StatusCodeパラメーターが含まれます。より詳細な情報は、上記の応答パラメーターの表を参照してください。



完成例

以下は、RESETPASSWORD関数の完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_resetpassword.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_resetpassword.jsp」を実行します。


<%           
/*              ws_ resetpwd.jsp                  */
%>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
 
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
rsr.setPassword("test");                           // change to the password of the account above
rsr.setOrgId(1);
rsr.setFunction("RESETPASSWD");
 
AdministrationPerson ap = new AdministrationPerson();
 
ap.setUserId("john.smith@yellowfin.com.au");
rsr.setPerson(ap);
 
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
if ("SUCCESS".equals(rs.getStatusCode()) ) {
    out.write("Account is reset");
} else {
    out.write("Failure");
    out.write(" Code: " + rs.getErrorCode() );
}
%>

こちら呼び出しは、ユーザーの詳細を編集します。これは、ユーザーID(例:ログインID方法に応じて、電子メールアドレス、または他のタイプのIDになります)を提供することで、ユーザーの識別に使用することのできるAdministrationPersonオブジェクトをパラメーターとして受け付けます。

応答には、すべてのユーザー詳細を含むAdministrationPersonオブジェクトが含まれます。

注意:この呼び出しがアカウントのパスワードを変更するのではありません。パスワードを変更するには、ユーザー複製と管理サービス#CHANGEPASSWORD関数を使用します。


リクエストの要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

Yellowfin Webサービス管理者ユーザーのIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「UPDATEUSER」に設定します。

PersonAdministrationPerson

更新しなくてはいけないユーザーの詳細を含むオブジェクトです。注意:以下のを参照してください。

以下は、こちらの関数のために「AdministrationPerson」オブジェクトに設定しなくてはいけない主要なパラメーターです。

AdministrationPerson要素データ型説明

UserId

String

詳細を変更するユーザーを識別するためのユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスにすることができます。

更新しなくてはいけないユーザーの詳細に関連する任意のパラメーターを提供することができます。例えば、新しい名や、更新が必要なステータスなどです。


リクエストの例

以下のSOAPの例は、こちらの呼び出しに渡すことのできるパラメーターを表示しています。今回は、ユーザーのステータスを「無効(Inactive)」にする例を示しています。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>UPDATEUSER</function>
            <person>
                <userId>binish.sheikh@yellowfin.com.au</userId>
                <status>ACTIVE</status>
            </person>      
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答の要素

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE
PersonAdministrationPerson更新されたユーザーの詳細を含むオブジェクトです。


応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Getting user information...</messages>
            <messages>Getting user information...</messages>
            <messages>Web Service Request Complete</messages>
            <person>
               <emailAddress>binish.sheikh@yellowfin.com.au</emailAddress>
               <firstName>Binish</firstName>
               <ipId>13000</ipId>
               <lastName>Sheikh</lastName>
               <roleCode>YFADMIN</roleCode>
               <status>ACTIVE</status>
               <timeZoneCode>AUSTRALIA/BRISBANE</timeZoneCode>
               <userId>binish.sheikh@yellowfin.com.au</userId>
            </person>
            <sessionId>586e172a7c4850bb3edbaaf5264a312d</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • こちらは、この呼び出しの基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("UPDATEUSER");
  • 詳細が更新されるユーザーを識別するために、AdministrationPersonオブジェクトを使用します。


    AdministrationPerson ap = new AdministrationPerson();
     
    ap.setUserId("john.smith@yellowfin.com.au");
  • 変更する詳細を指定します。例えば、ユーザーアカウントを無効(Inactive)にすることができます。


    ap.setStatus("INACTIVE");               // This shows that the user "john.smith@yellowfin.com.au" will not be able to log in
     
    rsr.setPerson(ap);
  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • この呼び出しの応答には、StatusCodeとPersonパラメーターが含まれます。より詳細な情報は、上記の応答パラメーターの表を参照してください。



完成例

以下は、UPDATEUSER関数の完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_updateuser.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_updateuser.jsp」を実行します。


<%           
/*             ws_updateuser.jsp           */
%>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
 
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
rsr.setPassword("test");                           // change to the password of the above account
rsr.setOrgId(1);
rsr.setFunction("UPDATEUSER");
 
 
AdministrationPerson ap = new AdministrationPerson();
ap.setUserId("john.smith@yellowfin.com.au");
ap.setStutus("INACTIVE");
rsr.setPerson(ap);
 
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
if ("SUCCESS".equals(rs.getStatusCode()) ) {
    ap = rs.getPerson();
    out.write("User Id: " + ap.getUserId() + "<br>");
    out.write("Password: " + ap.getPassword() + "<br>");
    out.write("First Name: " + ap.getFirstName() + "<br>");
    out.write("Last Name: " + ap.getLastName() + "<br>");
    out.write("Initial: " + ap.getInitial() + "<br>");
    out.write("Salutation Code: " + ap.getSalutationCode() + "<br>");
    out.write("Role Code: " + ap.getRoleCode() + "<br>");
    out.write("Email Address: " + ap.getEmailAddress() + "<br>");
    out.write("Language Code: " + ap.getLanguageCode() + "<br>");
    out.write("IpId: " + ap.getIpId() + "<br>");
    out.write("Time Zone Code: " + ap.getTimeZoneCode() + "<br>");
    out.write("Status: " + ap.getStatus() + "<br>");
} else {
    out.write("Failure");
    out.write(" Code: " + rs.getErrorCode() );
}
%>

こちらのWebサービスは、指定したユーザーのプロフィール画像をアップロードするために使用されます。画像は、文字列値に変換可能な、UTF-8のバイト配列でなければいけません。


リクエストの要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

Yellowfin Webサービス管理者ユーザーのIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「SETAVATARIMAGE」に設定します。

PersonAdministrationPerson

プロフィール画像を変更するユーザーの詳細を含むオブジェクトです。注意:以下のを参照してください。

ParametersString[]アップロードされるプロフィールど画像を表示する単一要素を含む配列です。画像は、文字列に変換可能な、UTF-8形式のバイト配列でなければいけません。

以下は、こちらの関数のために「AdministrationPerson」オブジェクトに設定しなくてはいけない主要なパラメーターです。

AdministrationPerson要素データ型説明

IpId

Integer

ユーザーの内部Yellowfin IP IDを提供します。値は、YellowfinのデータベースのPersonパラメーターのIpIdフィールドに保存されます。


リクエストの例

以下は、こちらのリクエストのSOAP XMLの例です。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
        <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>       
            <function>SETAVATARIMAGE</function>
            <person>
                <ipId>5</ipId>
            </person>          
            <parameters>
               <string>iVBORw0KGgoAAAANSUhEUgAAAdsAAA ... your image string</string>
            </parameters>
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答のパラメーター

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE


応答の例

サービスは、今回のSOAPの例に基づき、以下の応答を返します。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Web Service Request Complete</messages>
            <sessionId>5fbbf0f2d8a6f4902adde5bfb659fed7</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • 管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含む、こちらの関数の基礎的なリクエストから開始します。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("SETAVATARIMAGE");
  • IP IDを提供することで、ユーザーを指定することができます。


    AdministrationPerson ap = new AdministrationPerson();
    ap.setIpId(5);
     
    rsr.setPerson(ap);
  • java.nio.fileライブラリを使用して画像ファイルを選択します。


    Path path = Paths.get("D:/TMP/fish.jpg"); // existing image file
    byte[] data = Files.readAllBytes(path);
    byte[] encodeBase64 = java.util.Base64.getEncoder().encode(data);
    String img = new String(encodeBase64, "UTF-8");
     
    rsr.setParameters(new String[] {img});
  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • 応答には、StatusCodeパラメーターが含まれます。より詳細な情報は、上記の応答パラメーターの表を参照してください。



完成例

以下は、こちらのWebサービスの呼び出しの完成例です。こちらを使用するには、以下の手順に従います。

  1. コードをコピーして、「ws_setavatarimage.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じた詳細を追加するために、ホスト、ポート番号、管理ユーザー、ユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/ws_setavatarimage.jsp」を実行します。


<%          
/*              ws_setavatarimage.jsp                               */
%>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%@ page import="java.nio.file.Files" %>
<%@ page import="java.nio.file.Paths" %>
<%@ page import="java.nio.file.Path" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);       // adjust host and port number
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
  
rsr.setLoginId("admin@yellowfin.com.au");                     // provide your Yellowfin web services admin account
rsr.setPassword("test");                                    // change to the password of the above account
rsr.setOrgId(1);
rsr.setFunction("SETAVATARIMAGE");
  
AdministrationPerson ap = new AdministrationPerson();
ap.setIpId(5);
  
rsr.setPerson(ap);
  
Path path = Paths.get("D:/TMP/fish.jpg"); // existing image file
byte[] data = Files.readAllBytes(path);
byte[] encodeBase64 = java.util.Base64.getEncoder().encode(data);
String img = new String(encodeBase64, "UTF-8");
  
rsr.setParameters(new String[] {img});
  
AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
  
if ("SUCCESS".equals(rs.getStatusCode()) ) {
                out.write("<br>Success");
} else {
                out.write("Failure");
                out.write(" Code: " + rs.getErrorCode());
}
%>



ユーザーセッションの終了

これらのサービスは、Yellowfinユーザーのセッションを終了することができます。


こちらのサービスは、Yellowfinのセッションを終了しますが、ユーザーをログアウトさせるために「LoginSessionId」を要求します。これはユーザーを識別するに十分であるため、ユーザーIDは要求されません。LOGINUSER、またはLOGINUSERNOPASSWORD関数とともにシングルサインオンが実行されている場合、以下を介してLoginSessionIdを取得することができます。

String token = response.getLoginSessionId();


 こちらの値を保存することで、後ほどLOGOUTUSERリクエストに渡すことができます。

request.setLoginSessionId(token);


リクエストの要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

Yellowfin Webサービス管理者ユーザーのIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「LOGOUTUSER」に設定します。

PersonAdministrationPerson

プロフィール画像を変更するユーザーの詳細を含むオブジェクトです。注意:以下のを参照してください。

LoginSessionIdString終了しなくてはいけないYellowfinインスタンスのセッショントークンです。これは、ユーザーを識別するに十分です。

こちらの関数のために「AdministrationPerson」オブジェクトに設定しなくてはいけない主要なパラメーターです。

AdministrationPerson要素データ型説明

UserId

String

詳細を変更するユーザーを識別するためのユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

PasswordString上記アカウントのパスワードです。


リクエストの例

以下は、上記のパラメーターを使用して、こちらの関数のリクエストを示すSOAP XMLの例です。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
      <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>LOGOUTUSER</function>
            <person>           
               <userId>admin@yellowfin.com.au</userId>
               <password>test</password>
            </person>
            <loginSessionId>39fb11047affb98c9d081fb48bed0093</loginSessionId>
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答の要素

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE


応答の例

以下は、上記のSOAP XMLの呼び出しの応答です。

 <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Web Service Request Complete</messages>
            <sessionId>9cad6c76734e329c298e7b15c57a19db</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • 以下は、こちらの呼び出しの基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("LOGOUTUSER");
  • ログインセッションIDを渡します。


    rsr.setLoginSessionId(token);
  • ユーザーが複数のTomcatセッションに同時にログインしている場合は、パラメーターを設定することで、どのセッションを終了するのかを指定することができます。例:


    String[] _sessionId = new String[]{sessionId}; // log out by Tomcat session Id (cookies JSESSIONID)
    rsr.setParameters(_sessionId);

    終了のリクエストごとに、ひとつのセッションを提供します。TomcatセッションIDはオプションです。こちらを省略する場合、Yellowfinはすべてのユーザーのセッションを終了します。


  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • この呼び出しの応答には、StatusCodeパラメーターが含まれます。より詳細な情報は、上記の応答パラメーターの表を参照してください。



完成例

以下は、LOGOUTUSER関数の完成例です。スクリプトは、以下の手順を実行するために設計されています。

    • LoginSessionIdを取得するLOGINUSERサービスの呼び出し。
    • ログインリンクの構成。指定したユーザーのYellowfinセッションを初期化するために、まずはこちらのリンクをクリックしなくてはいけません。(今回の例では、john.smith@yellowfin.com.auをログインユーザーに使用します。指定するユーザーは、既にYellowfinインスタンスに存在していなくてはいけません。または、userIdを変更することもできます。)
    • ログアウトするためのリンクを構成。セッションを開始したら、こちらをクリックしなくてはいけません。


こちらのスクリプトを使用するには、以下の手順に従います。

  1. コードをコピーして、「logoutuser.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じて、ホスト、ポート番号、管理ユーザー、ログイン/ログアウトするユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/logoutuser.jsp」を実行します。


<%           
/*              logoutuser.jsp                */
%>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
String token = request.getParameter("token");
 
if (token == null) {
     
    //login the admin user:
 
    rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
    rsr.setPassword("test");                           // change to the password of the above account
    rsr.setOrgId(1);
    rsr.setFunction("LOGINUSER");
 
    AdministrationPerson ap = new AdministrationPerson();
 
    String userId = "john.smith@yellowfin.com.au";
 
    ap.setUserId(userId);
    ap.setPassword("test");
 
    rsr.setPerson(ap);
 
    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
    if ("SUCCESS".equals(rs.getStatusCode()) ) {
        String token_ = rs.getLoginSessionId();
        out.write("Login by opening the link in a new subtab prior to Logout. The tomcat session must be initialized...");
        out.write("<BR>Login: <A href='http://localhost:8080/logon.i4?LoginWebserviceId=" + token_ + "'>");
        out.write("http://localhost:8080/logon.i4?LoginWebserviceId=" + token_ + "</a><br>");
        out.write("<BR>Logout: <A href='http://localhost:8080/test.jsp?token=" + token_ + "&userId=" + userId + "'>");
        out.write("http://localhost:8080/test.jsp?token=" + token_ + "&userId=" + userId + "</a><br>");
    } else {
        out.write("Failure");
        out.write(" Code: " + rs.getErrorCode() );
        return;
    }
} else {
 
    //logout the user:
 
    out.write("Trying to logout " + token + " session...<br>");
 
    rsr = new AdministrationServiceRequest();
 
    rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
    rsr.setPassword("test");                           // set the password of the above account
    rsr.setOrgId(1);
 
    rsr.setFunction("LOGOUTUSER");
 
    rsr.setLoginSessionId(token);
 
    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
    if ("SUCCESS".equals(rs.getStatusCode()) ) {
        out.write("Logout: Success");
    } else {
        out.write("Failure");
        out.write("Code: " + rs.getErrorCode() );
    }
}
%>

こちらのサービスは、指定したユーザーをログアウトすることで、LOGOUTUSER関数と類似していますが、こちらは、ユーザーを識別するためにログインセッションIDではなく、ユーザーID(例:ログインIDの方法に応じて、電子メールアドレス、または他のタイプのIDになります)、またはユーザーのIP ID(YellowfinデータベースのPersonテーブルのIpIdフィールドの値)のいずれかを要求します。

こちらの呼び出しは、ユーザーID、またはIpIdの提供に使用されるAdministrationPersonオブジェクトを使用します。


リクエストの要素

以下の要素は、こちらのリクエストとともに渡されます。

リクエスト要素データ型説明

LoginId

String

Yellowfin Webサービス管理者ユーザーのIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

このYellowfinアカウントは、「Yellowfin Webサービス使用権」が有効化されたロールを持ち、デフォルト(プライマリー)組織に所属していなくてはいけません。

Password

String

上記アカウントのパスワードです。

OrgId

Integer

Yellowfin内のデフォルト(プライマリー)組織IDです。常に、「1」に設定します。

Function

String

Webサービス関数です。こちらは、「LOGOUTBYUSERID」に設定します。

PersonAdministrationPerson

ログアウトするユーザーの詳細を含むオブジェクトです。注意:以下のを参照してください。


AdministrationPersonオブジェクトに、以下のいずれかを設定します。

AdministrationPerson要素データ型説明

UserId

String

Yellowfinのセッションを終了するユーザーを識別するためのユーザーIDです。これは、ログインIDの方法に応じて、ユーザーID、または電子メールアドレスになります。

IpIdStringセッションを終了するユーザーのIp IDです。


リクエストの例

以下は、関数に渡されるリクエストを示すXML SOAPの例です。

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.web.mi.hof.com/">
   <soapenv:Header/>
   <soapenv:Body>
     <web:remoteAdministrationCall>
         <arg0>
            <loginId>admin@yellowfin.com.au</loginId>
            <password>test</password>
            <orgId>1</orgId>
            <function>LOGOUTBYUSERID</function>
            <person>           
               <userId>admin@yellowfin.com.au</userId>
               <password>test</password>
            </person>
         </arg0>
      </web:remoteAdministrationCall>
   </soapenv:Body>
</soapenv:Envelope>


応答の要素

返される応答には、これらのパラメーターが含まれます。

応答要素データ型説明

StatusCode

String

Webサービス呼び出しのステータスです。値の選択肢は、以下の通りです。

  • SUCCESS
  • FAILURE


応答の例

以下は、上記のSOAPの呼び出しの応答です。

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
   <S:Body>
      <ns2:remoteAdministrationCallResponse xmlns:ns2="http://webservices.web.mi.hof.com/">
         <return>
            <errorCode>0</errorCode>
            <messages>Successfully Authenticated User: admin@yellowfin.com.au</messages>
            <messages>Web Service Request Complete</messages>
            <sessionId>f8a04d7c9530ff18f65f95048e6a4500</sessionId>
            <statusCode>SUCCESS</statusCode>
         </return>
      </ns2:remoteAdministrationCallResponse>
   </S:Body>
</S:Envelope>


手順

Javaの例を使用して、こちらの呼び出しを実行するための詳細な手順は、以下を参照してください。

  • 以下は、こちらの呼び出しの基礎的なリクエストであり、管理ユーザーとしてのログインと、実行するWebサービスの呼び出しの指定を含みます。

    AdministrationServiceRequest rsr = new AdministrationServiceRequest();
     
    rsr.setLoginId("admin@yellowfin.com.au");
    rsr.setPassword("test");
    rsr.setOrgId(1);
     
    rsr.setFunction("LOGOUTBYUSERID");
  • ユーザーID、またはIpIdを渡すことで、ログアウトをするユーザーを識別します。


    AdministrationPerson ap = new AdministrationPerson();
    ap.setUserId(userId);
           
    rsr.setPerson(ap);
  • ユーザーが複数のTomcatセッションに同時にログインしている場合は、パラメーターを設定することで、どのセッションを終了するのかを指定することができます。例:


    String[] _sessionId = new String[]{sessionId}; // log out by Tomcat session Id (cookies JSESSIONID)
    rsr.setParameters(_sessionId);

    終了のリクエストごとに、ひとつのセッションを提供します。TomcatセッションIDはオプションです。こちらを省略する場合、Yellowfinはすべてのユーザーのセッションを終了します。


  • リクエストの構成が完了したら、呼び出しを実行します。


    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);

    管理Webサービスを初期化します。実行方法の詳細は、こちらを参照してください。


  • この呼び出しの応答には、StatusCodeパラメーターが含まれます。より詳細な情報は、上記の応答パラメーターの表を参照してください。



完成例

以下は、こちらの関数の完成例です。スクリプトは、以下の手順を実行するために設計されています。

    • ログインリンクの構成。指定したユーザーのYellowfinセッションを初期化するために、まずはこちらのリンクをクリックしなくてはいけません。(今回の例では、john.smith@yellowfin.com.auをログインユーザーに使用します。指定するユーザーは、既にYellowfinインスタンスに存在していなくてはいけません。または、userIdを変更することもできます。)
    • ログアウトするためのリンクを構成。セッションが設定されたら、こちらをクリックしなくてはいけません。


こちらのスクリプトを使用するには、以下の手順に従います。

  1. コードをコピーして、「test.jsp」として保存します。
  2. root(Yellowfin/appserver/webapps/ROOT)フォルダーにファイルを配置します。
  3. 環境に応じて、ホスト、ポート番号、管理ユーザー、ログイン/ログアウトするユーザーを調整します。
  4. インターネットブラウザから、「http://<host>:<port>/test.jsp」を実行します。


<%           
/*              test.jsp                */
%>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ page import="com.hof.util.*, java.util.*, java.text.*" %>
<%@ page import="com.hof.web.form.*" %>
<%@ page import="com.hof.mi.web.service.*" %>
<%
AdministrationServiceService s_adm = new AdministrationServiceServiceLocator("localhost",8080, "/services/AdministrationService", false);        // adjust host and port number
 
AdministrationServiceSoapBindingStub adminService = (AdministrationServiceSoapBindingStub) s_adm.getAdministrationService();
AdministrationServiceRequest rsr = new AdministrationServiceRequest();
 
 
String userId = request.getParameter("userId");
 
if (userId == null) {
 
    //login the admin user:
 
    rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
    rsr.setPassword("test");                           // set the password of the above account
    rsr.setOrgId(1);
    rsr.setFunction("LOGINUSER");
 
 
    AdministrationPerson ap = new AdministrationPerson();
 
    userId = "john.smith@yellowfin.com.au";
 
    ap.setUserId(userId);
    ap.setPassword("test");
 
 
    rsr.setPerson(ap);
     
    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
 
    if ("SUCCESS".equals(rs.getStatusCode()) ) {
        String token_ = rs.getLoginSessionId();
        out.write("Login by opening the link in a new subtab prior to Logout. The tomcat session must be initialized...");
        out.write("<BR>Login: <A href='http://localhost:8080/logon.i4?LoginWebserviceId=" + token_ + "'>");
        out.write("http://localhost:8080/logon.i4?LoginWebserviceId=" + token_ + "</a><br>");
 
        out.write("<BR>Logout: <A href='http://localhost:8080/test.jsp?token=" + token_ + "&userId=" + userId + "'>");
        out.write("http://localhost:8080/test.jsp?token=" + token_ + "&userId=" + userId + "</a><br>");
 
    }else {
        out.write("Failure");
        out.write(" Code: " + rs.getErrorCode() );
        return;
    }
} else {
 
    //logout the user:
     
    out.write("Trying to logout " + userId + " session...<br>");
 
    rsr = new AdministrationServiceRequest();
 
    rsr.setLoginId("admin@yellowfin.com.au");          // provide your Yellowfin web services admin account
    rsr.setPassword("test");                           // change to the password of the above account
    rsr.setOrgId(1);
     
    rsr.setFunction("LOGOUTBYUSERID");
 
    AdministrationPerson ap = new AdministrationPerson();
    ap.setUserId(userId);
     
    rsr.setPerson(ap);
 
    AdministrationServiceResponse rs = adminService.remoteAdministrationCall(rsr);
 
 
    if ("SUCCESS".equals(rs.getStatusCode()) ) {
        out.write("Logout: Success");
    } else {
        out.write("Failure");
        out.write(" Code: " + rs.getErrorCode() );
    }
}
%>